Atmel ATAVRAUTO200 Guide de l'utilisateur télécharger pdf (Page 11)

Using the ATAVRAUTO200

ATAVRAUTO200 User Guide 2-9

7698A–AUTO–01/07

2.5.1 Using the ATAVRAUTO900 Adaptator

An additionnal adaptator has to be used to program the board using IPS or JTAG mode.

The 10 pins connector is used for the JTAGICE mkII device and the 6 pins connector is

used for the AVRISP device. To plug the ATAVRAUTO900 connector to the board, the

arrow (on the adaptator) has to be in front of the point (on the board).

Figure 2-10. ATAVRAUTO900 Connection

Table 2-4. ICE Connector

PIN Function

1 TCK

2 GND

3 TDO

4 VCC

5 TMS

6 NRES

7 VCC

8 NC

9 TDI

10 GND

Table 2-5. ISP Connector

PIN Function

1 MISO

2 VCC

3 SCK

4 MOSI

5 NRES

6 GND

JTAGICE

ISP

The arrow has to be in front of the point

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 20 21

Pas de commentaire

Atmel ATAVRAUTO200 Guide de l'utilisateur Page 11